%20%7C%20Meross%20%7C%20MSH300HK%20?unique=815d1c3)
Smart WiFi Hub(One HUB needs to connect 16 devices) | Meross | MSH300HK
- HomeKit supported.
- Compact housing, size of 5.8 x 4.1 x 2.1 cm.
- Support both 802.11n Wi-Fi and 433MHz RF.
- Bridge your meross low-power-consumption smart devices such as smart sensors and smart thermostat valves to the Internet.
- Works with the Wi-Fi you already have.
- You need to find a Type-C cable and an adapter to use.
SPECS
Compatible Devices
- HomeKit Integrated Hub
- MS100, MS100F, MS200, MS400, MTS100, MTS150, MTS150P, GS559A
- Non-HomeKit Integrated Hub
- MTS100, MS100
Input
- 5V DC, 500mA Min.
Dimensions (W x D x H)
- 59x41x21mm / 2.3 x1.61×0.83in.
LED
- 1 x Status LED
Button
- 1 x Power button
- Press twice within 2 seconds to enter pairing mode.
- Press and hold for 5 seconds to initiate the factory reset process.
Antenna
- One Wi-Fi internal antenna
- One 433MHz RF internal antenna
Wireless Standards
- IEEE 802.11 b/g/n, 2.4GHz,
- 1T1R 433MHz RF
Wireless Security
- 64/128 bit WEP, WPA-PSK/WPA2-PSK supported
- *Does not support Enterprise WiFi.
Certifications
- CE, RoHS, WEEE, FCC,IC
System Requirements
- Smartphone running iOS 10* or later, Android 6.0 or later
- Existing Wi-Fi network
- *HomeKit version requires iOS 13 or later.
Environment
- Operating Temperature: 0°C~40°C (32°F~104°F)
- Storage Temperature: -40°C~70°C (-40°F~158°F)
- Operating Humidity: 10%~90% non-condensing
- Storage Humidity: 5%~90% non-condensing
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.